Commercial window film · Toronto & the GTA
Security, solar and privacy film for storefronts, offices, schools and institutions — installed after hours by a Madico SafetyShield Premier Partner, with a single point of contact from site visit to walkthrough.
Who we work with
Smash-and-grab goes through the front glass. Anchored security film keeps the pane in the frame and the thief outside long enough to give up. Dispensaries, jewellers, pharmacies, electronics.
Frosted bands and branded privacy film on glass partitions; solar film on the perimeter so the west side is usable at 3 pm and the HVAC stops fighting the windows.
Forced-entry rated film on entry vestibules and ground-floor glass, specified to the same standards used on government buildings. Installed on your schedule, around your hours.
Tenant comfort complaints, fading finishes, bird strikes, and glass that needs to meet a safety-glazing requirement after the fact. Film is faster and cheaper than replacing the units.
What we install
Madico SafetyShield® 1500 G2 anchored to the frame with structural silicone. Independently tested to ASTM F3561 (forced entry after a simulated active-shooter attack), EN 356 P2A, ASTM F1642 (blast) and UL 972 (burglary-resisting glazing).
Spectrally selective films on perimeter glass to cut solar heat gain and glare without darkening the space or changing the look of the building from the street.
Frosted bands on partitions and meeting rooms, full-frost on washroom and clinic glass, and cut-vinyl logos and patterns so the privacy film carries your brand instead of hiding it.
A recent project
A two-storey office and plant in the GTA: solar film on the perimeter glass, frosted bands on the boardroom and partition glass with the company's logo cut into the film, and branded privacy on the entrance. The client brought us back for a second phase.
“The team was professional, reliable, and easy to work with throughout. Communication was clear, timelines were met, and the installation was done to a high standard. We would confidently recommend Winsolux for commercial window film work.”— Phillip C., Google review
How a commercial job runs
Most of our commercial work happens evenings and weekends. We phase larger projects by floor or elevation so your people are never working around us, and one person — usually one of the owners — runs the job from the first site visit to the final walkthrough.
We measure every pane, note glass type and frame condition, and flag anything that shouldn't be filmed.
Priced by elevation or zone, with film specs and test data attached so facilities, ownership or an insurer can sign off.
Crew sized to the job, site protected, work phased so the building stays open. Security film anchored to spec.
Every pane inspected with you, warranty registered, and a record of what went where for your building file.
ASTM F3561
Forced-entry resistance after a simulated active-shooter attack.
EN 356 · P2A
European standard for resistance against repeated manual attack.
ASTM F1642
Airblast loading — keeps glass fragments out of the room.
UL 972
Burglary-resisting glazing material, with frame anchoring.
Standards apply to Madico SafetyShield® 1500 G2 installed with a qualifying anchoring system. Test summaries available on request.
Site visit
Call or text (289) 819-2470, email info@winsolux.com, or use the form and tell us roughly how much glass you're looking at.
Security, solar and privacy window film. Authorized Madico SafetyShield® installer serving Toronto and the Greater Toronto Area.